Tool belt is a must for keeping things right-at-hand and to remain safe. The fact that you are looking for the best carpenters tool belt is not surprising at all! It saves a lot of time and hustle. It Also saves the back from bending down repeatedly to grab a tool.
But not all tool belt is the same and all carpenters tool belt isn’t for everyone either. Different person has different needs. Same goes for carpenters.
Read this best carpenters tool belt review to find out which one will suit you the most.
Our Winner After 22+ Hours of Carpenters Tool Belt Research
Occidental Leather 9855 Carpenters Tool Belt
- 10 inch deep nylon bags
- Fit flat flip design
- Great tool holding capacity
Occidental Leather 9855 Carpenters Tool Belt
Great tool holding capacity
Gatorback B145 Carpenters Triple Combo
Occidental Leather 8089 Oxylights 7 Bag Framer
22 Pockets & Holders
8 Best Carpenters Tool Belt Reviews
The tool belts that we covered in this massive carpenters tool belt guide are:
- Occidental Leather 9855 Carpenters Tool Belt
- Gatorback B145 Carpenters Triple Combo
- Occidental Leather 8089 Oxylights 7 Bag Framer
- Dewalt DG5617-20 Pocket Pro Framer’s Combo Tool Belt
- Gatorback Professional Carpenters Tool Belt Combo
- TradeGear Carpenter’s Combo Tool Belt
- Dewalt DG5650 Carpenter’s Pro Combo
- Dewalt DG5372 Carpenter’s Suede Apron Tool Belt
Occidental Leather 9855 Carpenters Tool Belt [Best Quality – For Heavy Usage, Lasts Much Longer]
- 10-inch deep Nylon bags.
- Size: 32 to 44 inches.
- Adjust-to-fit Fat flip design.
- Multiple tool holders, hammer loop.
- Leather-reinforced bottom and corners.
If you don’t mind spending a few extra bucks to get more feature-packed stuff, then the Occidental Leather 9855 will be the best choice for you. It’s the best leather tool belt for carpenters on the market.
This is an ideal tool belt for carpenters because of its fat lip design. It has 10-inch deep industrial nylon bags with leather-reinforced bottom and corners.
This tool belt is rock solid, perfect for heavy-duty use. It’s tough as nails, unlike nylon tool belts. Think about some of the sharp objects that you will carry in those bags. Undoubtedly you don’t want sharp objects poking out and hitting you. Leather tool belt like this Occidental Leather one can save you from that.
It has multiple tool holders and a 2-in-1 tool & hammer holder in the back. They are made out of lightweight & comfortable canvas fabric, and you can wear them for a long time continuously.
This tool belt has D-Rings pre-installed, so you’ll be able to add a suspender easily. Its hammer loop is also a nice addition.
This tool belt has two versions: left hand & right hand. So, you won’t have to worry if you are left-handed or right handed. Its waist size is adjustable and fits 32 to 44 inches.
Speaking of durability, this top rated tool belt will easily last for several years. Some carpenters have been using leather tool belts for decades made by Occidental Leather. So in terms of durability, no other tool belt can beat this one.
One main drawback is its weight because it’s made of leather. It may seem a little bulky to you.
Overall this Occidental Leather 9855 tool belt is the best that money can buy. You really don’t want to go cheap on a tool belt if you are working all day long climbing up and down. Considering its quality, it really is worth the price.
- Deep pockets.
- Good storage capacity.
- Comfortable & adjustable.
- Multiple tool holders.
- Top quality, will last a long time.
- Excellent warranty
- A little bit heavy.
- High initial cost.
Additional Accessories: Take one piece of advice: get a suspender. You may think this is old school but this actually makes a huge difference. Takes all the weight off your hips and puts it on your shoulders. Helps to stop back pain from heavy loads. If you buy a tool belt that doesn’t include a suspender then you really should buy a suspender separately.
If you don’t want to spend much then you can try this Framer suspender or Gatorback B606. You can expect this one to last several years. If you want a premium-quality suspender that will surely last for years, even decades then try this Occidental Leather 5055 suspender. This is the best tool belt suspenders being extremely comfortable and well designed.
Gatorback B145 Carpenters Triple Combo [Best Budget Tool Belt – Perfect For Regular Usage, Good Durability]
- 1250 Duratek Nylon.
- Size: 26 to 55 inch.
- Good ventilation.
- Patented air channel.
- Box design pockets.
The Gatorback B145 Carpenters Triple Combo Belt has 3 main specialties: comfort, support, and ventilation. It’s a great tool belt at mid price range.
The Gatorback B145 uses heavy duty 1250 DuraTek nylon, making it one of the best nylon tool belt. This keeps the pouches rugged and durable but light enough to not weigh you down. Unlike the previous leather tool belt. Though nylon made tool belt won’t be as durable as leather made tool belt.
This tool belt has 9 pouches with an interior plastic lining to give the pouches a box shape that doesn’t sag. The box design keeps the pouches open and easily accessible. It also prevents tools from poking holes through the bottom.
It has a total of 6 waist sizes from 26 to 55 inches. Be sure about your waist size before purchasing. Otherwise, you may have to change it. Its waist size is adjustable and it has a padded back for cushioning.
This tool belt is non-sweaty. If you sweat a lot at work, then this tool belt is for you.
Lastly, the Gatorback B145 is backed by a one-year defect free warranty. You will get replacements in case of any manufacturing defects. So, you won’t have to worry if something goes wrong with this tool belt. (Note: Warranty period may change any time)
If you want an all-rounder tool belt at an affordable price then this one will be best for you.
- Good storage capacity.
- Durable construction; box design pockets.
- Very comfortable, lightweight & adjustable.
- Sweat-proof padding belt.
- Patented air channel provides sweat free experience.
- Weak stitching
Occidental Leather 8089 OxyLights 7 Bag Framer Tool Belt [Better Choice For Framers]
- Made with tough DuraTek 1250 fabric
- Size: 29 to 54 inches
- Contractor grade
- 22 Pockets and holders in total
The next tool belt to make it in our list is the Occidental Leather 8089 OxyLights 7 Bag Framer Set.
It’s the best framers tool belt out there. Though its name says that it’s a framers tool belt, other types of carpenters can use it too.
The Occidental Leather 8089 is the ultimate heavy-duty, professional grade and contractor grade tool belt. This belt offers a total of 22 compartments with a great mix of both small and large compartments. Plus a hammer loop.
The compartments are designed with hand-specific tool holders and are furthermore double ply to hold their shape. It is made from very high-quality anti-abrasive Industrial Nylon cleverly combined with leather. Which is scratch proof and water resistant.
And finally, for waist sizes, this tool belt has 6 different adjustable waist sizes ranging from 29 inches to 54 inches.
This one will last longer too. Its quality is surely above average. Overall this is a great choice framer carpenters.
- Scratch and water resistant.
- Good storage capacity.
- Adjustable. & comfortable.
- Shape-intact pocket.
- No cons worth mentioning
DEWALT DG5617 20-Pocket Pro Framer’s Combo Tool Belt
- Built Heavy Duty Nylon.
- Size: 26 to 46 inches.
- Hammer loop, Cell phone holder.
- 9 Main pockets(20 smaller).
- Comes with a suspender.
This tool belt is actually made by CLC for Dewalt. If you need a tool belt that comes with a suspender to protect your back then Dewalt DG5617 is a good option for you.
This tool belt is made from durable nylon. It has fully adjustable padded yoke-style suspender, so you can finish your job with comfort and avoiding injury. It also has a zippered pocket where you can keep small things and there is a carabiner too for keys or lanyard.
It has 9 main pockets with 11 smaller pockets for keeping nails, parts, tools, pencils etc. It has a hammer loop, that’s a nice thing to have.
Another cool thing is that it has a neoprene-padded cell phone holder so you can keep your phone with you when working. But one problem, the cell phone holder isn’t enough big. So, you may face difficulty if you want to keep a big screen smartphone. But it can easily fit in feature phones.
Available waist size is 29-46 inches, so it should fit most of the persons. It has a built-in utility knife pocket which has a hard plastic liner. So, you won’t have to worry about making holes accidentally in the belt.
It’s patented pouch handle will allow you to adjust and carry it easily. Overall this is a good tool belt that comes with suspenders.
- High-quality material.
- The suspender is adjustable.
- Comfortable & lightweight.
- Zippered pocket, utility knife pocket.
- Easy one-hand carrying.
- Velcro sometimes tend to come off.
- Cell phone holder size is small.
Gatorback Professional Carpenters Tool Belt Combo
- Built Tough with DuraTek 1250 fabric
- Size: 26 to 49 inches
- Air Ventilated Padding, Breathable Fabric
- Total 13 pockets (+hammer loop)
- Bar-tack stitching, metal rivets
This is the perfect tool belt for carpenters who sweat a lot while working. It’s good for those who are looking for some airy and no-moisture comfort feel.
This tool belt offers a total of 13 storage compartments. It has a good mix of both large and small pouches which are more than enough to accommodate a good mix of large and small tools and accessories.
On the right, it has 7 pockets and a hammer loop. On the left, it has 4 pockets, inclusive of an interior speed square pocket, and 2 slots.
This tool belt has 5 different waist size ranging from 26 to 49 inches.
Now, the best part of this tool belt is that this belt is made from DuraTek 1250 fabric, bar-tack stitching, metal rivets and a high-density web-core.
It also features air ventilated tool belt padding and breathable fabric which makes sure that you never feel sweaty and sticky wearing it.
- High storage capacity, adjustable.
- Durable construction.
- Sweat-proof padding belt.
- Comfortable & lightweight.
- The Velcro may lose its stickiness.
TradeGear Carpenter’s Combo Tool Belt
- Made with tough DuraTek 1250 fabric
- Size: 26 to 55 inches.
- Double-Tongue Roller Buckle.
- 11 pockets, 2 slots (+hammer loop)
- Air ventilated padding, breathable fabric.
This tool belt is made by TradeGear partnered up with Gatorback.
The TradeGear Carpenter’s Combo Belt has 2 heavy-duty pouches and 15 durable pockets varying in sizes. It offers up to 17 compartments in total.
One thing that we really admire is the outstanding construction of this monster belt.
First of all, it has a breathable Memory Foam Padding Air-Channel Ventilation and Contoured Back Support.
It has reinforced box design with an inner hard plastic lining is strengthened by a nylon web-core interior, reinforced with bar-tack stitching. It also has heavy duty metal rivets, 250 denier duraTek fabric with high-density nylon webbing around pocket-openings.
Apart from this, the top handles make it a so much easier to carry single-handedly to even hang it on a hook.
And it has 5 different waist sizes ranging from 26 inches to 55 inches.
Last but least, the TradeGear Medium Carpenter’s Combo comes with a 30-day money return offer, so you can buy the belt with the confidence of quality.
- Sweat-proof padding belt.
- Durable construction, adjustable.
- Good storage capacity.
- Comfortable & lightweight.
- 30-day money back guaranty.
- Velcro tends to come off.
Dewalt DG5650 Carpenters Pro-combo [Best Tool Belt For The Money]
- Padded belt with Dri-Lex liner
- Size: 29 to 46 inches
- Zippered Pocket
- Total 31 pockets
- Large, gusset-style pockets
If you are in need of an apron with the same quality but with more capacity, then this Dewalt DG5650 tool belt will be perfect for you. It’s one of the best tool belts for carpenters with a low price tag.
The DEWALT DG5650 Carpenter’s Pro-combo Apron Tool Belt offers you up to 31 pockets. Definitely more spacious and generous than our former pick from the company.
It has 11 main pockets which are large, gusset-style pockets and provide extra capacity and easier access. Perfect for housing those quick-need tools like hammers, drivers, etc.
And then, it also has 24 smaller pockets for those tiny, itsy bitsy things like screw bits, chalks, etc.
Much like most of Dewalt tool belt, the Dewalt DG5650 also has a patented pouch handle, it allows simple belt adjustments, easy one-hand carrying. This handle will let you hang it on hooks. The construction feels very durable and heavy-duty.
The nice detail is that most pockets are zippered so that you don’t end up losing any tiny component while working and moving about. It also has a carabiner or lanyard for keys!
- High capacity, adjustable, padded belt.
- Some zippered compartments.
- Comfortable & lightweight.
- Carabiner and lanyard.
- Tends to disintegrate easily.
Dewalt DG5372 Carpenters Suede Apron Tool Belt [Good For Light Usage]
- Heavy-duty top grain leather
- Size: 29 to 46 inches
- Double-Tongue Roller Buckle
- 5 Main pockets(7 smaller)
Dewalt produces some of the best tool belts for carpentry, and they understand that not everyone is looking for a tool belt with lots of features. This tool belt is made for the minimalists.
The Dewalt DG5372 Carpenter’s Suede Apron offers a total of tool compartments. It has 5 main pockets and 7 small ones which will allow you to keep anything from the nail, parts, tools, nail sets, pencils, etc.
Keep in mind that the Dewalt DG5372 is made for people with 29-inch to 46-inch waist sizes, no more and no less.
It has a patented pouch handle that lets you do simple belt adjustments. It also has top handles which allow easy, single-hand carrying.
As for your concerns with durability, the Dewalt DG5372 is made out of high-quality heavy-duty suede leather which should last a few good years, at least. Being suede-made, the belt is very lightweight and comfortable to wear. It won’t pull your pant down.
One very neat design detail that we happen to like a lot is that the belt is has a 2-inch wide web belt with double-tongue roller buckle that helps keep the help stable and put on your waist.
- Good tool housing capacity.
- Lightweight & adjustable.
- Comfortable to wear.
- Made of heavy-duty suede leather.
- Tends to disintegrate
Verdict: Which Carpenters Tool Belt Should I Buy?
Tool belts, as you have seen above, come in numerous forms. And every person has a unique choice.
Almost every tool belt above can fulfill your basic purpose, it’s all about choice and needs. Just pick one from above that has all the features you need.
Our review is done for today. We hope you really enjoyed and found our review very helpful. A tool backpack can also be really handy to enhance your efficiency. You can read our review of tool backpack if you ever plan to buy one.
Our Ultimate Tool Belt Buying Guide
What is a Tool Belt?
Obviously, you know what is a tool belt. However, still, we’re going to give you a brief explanation. Simply, tool belt is actually a belt with some small bags/pouches that holds all of the tools you want to carry.
Tool belt keeps the user’s tools organized. It’s a handy accessory to keep your must-have tools close by. You can wear it like your regular belt around your waist. You’ll spend more time working and less time searching for a tool when you have a tool belt and you are wearing it.
Tool belts provide a lot of space for a number of pouches and pockets. The benefits of tool belts include reduced fatigue, greater convenience, and back support. Thus, it will help you to save time, work faster, efficiently and more safely.
Whether you are working with a hot surface or hot equipment, climbing a ladder or working high above the ground, you need a tool belt to make your job easier.
How to Choose the Best Carpenters Tool Belt?
If you don’t know what to look for in tool belt, then choosing the best carpenter tool pouches (tool belt) can be challenging. By the way, you may think the best tool pouches are different than the best tool belt. Actually, both are the same thing.
Just like other tools, firstly consider the type of work you will be doing while choosing toolbelt. Someone needs lighter belts while someone needs the heavier one. That’s why best doesn’t mean best for every person.
But don’t worry. We are here to help you. We will explain all the things you need to consider before buying a tool belt.
How Often Will You Be Using Your Belt? How Many Pockets Do You need for your tools? Will the job require you to work at great heights? What Material Do You Need? What kind of tool will the job require?
You have to consider many other factors while choosing a toolbelt. Keep reading if you don’t want to ask anyone what is the best tool belts for carpenters or the best tool bags for carpenters. So, let’s start!
Fit and Finish of Toolbelt:
Toolbelt comes in various sizes. You should not buy the single size belts if your waist size is less than 34 inches.
Always try on toolbelt before buying and make sure that the toolbelt fits comfortably. If you are ordering your tool belt online, you need to ensure your tool belt will fit.
Toolbelts with fixed bags have severely limited storage capacity. That’s why they are uncomfortable.
Look for a tool belt that has enough padding. Padding allows tool belts to be used over longer periods. Padded tool belts make your work experience more comfortable.
Quality and Durability:
While choosing tool belt, buy a tool belt with enough space to carry out all of your tools. It is one of the most important considerations.
There is a lot of tool belts model available on the market. So, it’s not very simple to find out the one that fits your best. It is important that your toolbelt is organized according to your often used tools and has wide space.
For comfort and durability, a lot of people prefer leather belts.
When doing jobs that require wearing gloves, you will get a major advantage if you use belts that have a large main compartment. Leather belts typically have this compartment.
On the other hand, a low profile main compartment is available in the soft leather bags and are capable of being adjusted by sliding.
When completing difficult tasks that require mobility, the ability to slide your tool belt is a great advantage.
It’s most important to choose one tool belt that is light, strong and comfortable to use. Having the most comfortable tool belt will make your job easier. When compared with normal fabric belts, leather tool belts tend to be important and heavier. Tool belts that are made of fabric are more comfortable than leather belts.
Choose a tool belt with a sturdy buckle, but make sure that the buckle is not too large. A large sturdy tool belt buckle can dig into your stomach when you lean down. Choose one that has hammer loops and combo square holders.
Choose Based on Your Job:
Choose a tool belt that has pockets for your specific tasks. For example, choose a tool belt that has a pencil holder. If you are using a pen during construction, find one that prioritizes your specific tasks.
You have to find out what tasks you will do often and then buy a tool belt that is built around your demands. It will go waste if your tool belt is too heavy or bulky to use frequently.
Choose one that provides individual tool holders inside the largest compartment.
How Often Will You Be Using Tool Belt?
Generally, the workers who work with the tool belt spends more than 6 hours in the field every day. If they don’t use heavy duty belts, the belt will be wrecked within some days.
But if you are not one of those who work for more than 6 hours daily or you don’t need to use it frequently, then you can buy a cheap tool belt that is not durable.
Because the tool belt won’t have to withstand as much tear and wear. It will be better for you because it will act with you like an expensive and more durable tool belt.
Number of Pockets You Need?
How many pockets you will need depends on how many tools you’re going to carry with it.
Most of the tool belt has 10-12 pockets. There is also toolbelt available with more than 30 pockets. You need to make sure how many tools you will carry before purchasing a tool belt.
What Kind of Material Do You Need?
Tool belts are usually made of four types of materials. They are Nylon, polyester canvas, Leather and Suede Leather.
Tool belts are rarely made of nylon material. This material is a little too light and flexible. Nylon rips quite easily and isn’t very durable.
Leather material is strong out of the other three materials. If you’re going to carry a lot of heavy loads, then it can be your best choice. The doesn’t rip and hold up quite nicely. But one negative point is, the leather belts are quite heavy. suede leather isn’t close to being as rugged as leather. But they are still pretty durable. They are slightly softer than pure leather.
The best thing about polyester canvas material is that they are water resistant. Polyester canvas is much more lightweight as compared to both leaders. Though it rags and rips easily, it is much more comfortable.
Every human has different ways to view the world. Someone wants a specific color, while others don’t like it.
Someone wants the specific model, while others don’t need it. Someone want a tool belt with a lot of smaller pockets and loops while someone one fewer pocket and loops of bigger size. Someone will ignore the specific design of the tool belt only because he doesn’t like the design. Every human being has his own style and choice.
There are many brands available in the market that produce the best top rated carpenters tool belt. Pick a tool belt from one of that.
Your Tool Belt Size Guide
If you’re going to buy your first tool belt or replacing an old tool belt that has been with you for a long time, you may need to resize the tool belt. Here is a guide to do it very easily. This guide will ensure you make the right choice.
Firstly, place your existing tool belt in a straight line. Then measure the tool belt from the end of the buckle to the most commonly used hole.
After that, pick the belt size that is closest to your measurement. But, if you don’t have a tool belt to measure, then you can get an approximate size of tool belt by adding 4 inches to your pant waist size.
Order the lightest and smallest bags that have enough room. calculate your tools and fasteners. Then determine, if you need standard or XL size pouches. Keep in mind that, all pouches and accessories are interchangeable.
It’s your choice, you can choose standard or XL pouches. Some professional workers want more space regardless of their height, while many other professionals desire a less obstructive overall fit. XL pouches are 1″ wider than standard pouches on average.
Detachable Tool Belt accessories
A lot of tool belts come with all kinds of tools and nifty gadgets that will make a carpenter’s work more easier in terms of carrying tools.
In this point, we will discuss different detachable and slip-on tool belt attachments. Below, we have also listed the most common accessories that can be present in a tool belt.
- Hammer Loops-
Hammer loops will hold your hammers so you can get them easily. There are many tool belts available that have more than one hammer loop.
- Drill Holders-
Drill holders are designed to hold your drill safely. They are similar to a hammer loop.
Drill holder is a leather loop and has a metal hoop that extends out from the tool belt and enough large to hold the nose of a cordless drill. While workers are using their hands for other tasks, they can slip the drill into the hoop and let it hang from their waist.
- Tool, Nail and Screw Pockets/Pouches-
These pockets/pouches are great for holding tools, nails screws and other small parts that are easy to lose otherwise. There can be multiple pockets or a single pocket in the same loop.
These tool pouches can be made from various kinds of materials. Cloth pouches are not very sturdy. They are inexpensive too. Leather pouches are more durable. They will hold more without collapsing or sagging.
- Zippered or Latched Pouches-
They are the most common type of accessory that is added to a tool belt. They are usually made of rugged cloth or leather. They hold multiple tools from knives to razor cutters.
- Belt Hooks-
Another slip-on attachment for a tool belt is a simple metal hook that can be used for a multitude of things. Sometimes they may have a loop attached to the belt to slip through or the hook may have a metal clip, loop or clamp.
The tool hook can hold lanyards that are attached to tools, closed-end wrenches as well as any type of tool with an open hole for hanging on a pegboard.
Tool Belt vs Tool Pouch
Tool belts and tool pouches help you to carry your most important tools, especially those tools which you use frequently in your workplace. They are very popular for their similar functions. But the only difference is in their construction.
Tool pouches are larger than tool belt and designed in a way that you can carry them by hand. When working on roofs, ladders or any other places where you’re unable to bring a full tool kit, then tool belt is safer to use than tool pouch.
On the other hand, tool pouches are better for working on tight areas where the tool belt feels too bulky. That’s why most of the plumbers use pouches instead of belts.
Who Makes The Best Tool Belt?
There are a lot of companies that make tool belts. The number is so high that you might find it overwhelming. However, there are some companies that produce high-quality tool belts and pouches.
Dewalt, Dickies and ToughBuilt are three famous brands of tool belt. They are popular for their tool belts quality, styles, designs and security. Some other famous brands are Occidental Leather, Gatorback and CLC.
Who is a Carpenter?
A carpenter is a craftsman skilled in woodwork.
They are a specialized type of woodworker. They are also known as an apprentice carpenter, construction carpenter, finish carpenter, rough carpenter, trim carpenter, journeyman carpenter etc.
What Does a Carpenter do?
Carpenter construct, erect, install and repair building structures and frameworks.
They are involved in many different types of construction, from the building of highways and bridges to the installation of cabinetry for bathrooms kitchens as well as sliding and drywall.
Their unique job duties vary depending on whether they work in finish carpentry or rough carpentry. In this part, you’ll find detailed information about what does a carpenter do.
Finish Carpenters: Finish carpenters primarily makes furniture, cabinetry, instruments, and models. The work of finish carpenters is often done in a shop, though some of them travel to construction areas to fit and install trim and household furnishings. If you’re a finish carpenter, then choose the best finish carpenter tool belt according to our guide.
Rough Carpenters: Rough carpenters usually do their work outdoors on large construction projects. They use blueprints to decide what amount and type of material they need for their job. They may use woodworking tools, power saws or hand saws.
Trim Carpenters: They specialize in molding and trim, baseboard, mantels and many other types of ornamental work.
Cabinet Maker: These types of carpenters do fine and detailed work, specializing in the making of cabinets made from wardrobes, storage chests, etc.
Ship’s Carpenter: They specialize in shipbuilding. Ship carpenters are usually called for emergency repairs.
Restoration Carpenter: They works in historic building restoration. They restore a structure to a former state.
Conservation Carpenter: They work in architectural conservation. They are known as “preservation carpenter” in the U.S who work in historic preservation. Conservation carpenters keep structures from changing.
Formwork Carpenter: It creates the shuttering and falsework used in concrete construction.
Framing Carpenter: They focus on the foundational structures of buildings. They may work in factories, business buildings, and residences. Buying the best framing carpenter tool belt will provide more advantage while doing the framing job.
What is the Best Workplace of a Carpenter?
Carpenters may work on indoors or outdoors depending on their unique work. Finish carpenters usually work indoors while rough carpenters mostly work on outdoors.
Their job requires a lot of hours standing while joining and cutting wood materials. That’s why their job is physically intensive. Carpenters should follow workplace safety standards as they use sharp and heavy equipment.
Who Need to Use Tool Belt?
There are some main users who use tool belts in their regular work. This belt makes their everyday work easier, flexible and efficient. In this point, we are going to introduce you to those main users of a tool belt.
Tool belt is very helpful for carpenters. Carpenters utility belts and bags help them to put their small and frequently used tools into their hand range.
Usually, carpenters need to use different types of small tools. In that case, a carpenters tool belt with suspenders can be a life savior. There is a risk of losing these small tools anytime. A carpentry tool belt will be the best solution for this problem.
A technician needs some common tools to perform his job. You can carry your technical tools easily by using a tool belt.
These tools can be lost anytime if they are not kept carefully in a fixed place. Using a tool belt will decrease the chance of losing your tools in working time.
A tool belt will serve a craftsman highly. They are like craftsmen best friends. The craftsman needs to use different tools to perform their job. So, craftsmen use tool belt to perform their work properly and efficiently.
Painters have to deal with a lot of brushes and colors in their everyday work. Generally, professional painters always have many projects pending on their hand.
So, every second of time is very important for a painter. They use brushes and boxes that are small in size and can be lost easily. A tool belt helps them to keep their tools organized. It also helps them to save time.
A mechanic needs to use a lot of tools to perform their regular job. Tool belts are very helpful for mechanics to do their job. Tool belt makes their work easier and faster.
A tool belt is very helpful for roofers as they work by hanging. They can keep all of their tools with them with the help of tool belt.
I think, now you have recognized the main users of a tool belt who use tool belt in their everyday work.
Different Tool Belt for Different Profession
The purpose of all tool belt is the same though their type varies according to the profession. Different professionals need a different type of tool belts.
- Carpenters Tool Belt:
There are a lot of tool belt available on the market that is dedicated to the carpenters. They are suitable for every professional carpenter for their capacity and decent quality.
Carpenters tool belt are made to put the whole essential carpentry tools. Most of the carpenter’s tool is sharp. A tool belt with multiple pouches will help carpenters in their work. Covered pouches will be best on them.
It will be very good if the tool belt has a few large pouches as some of the carpenter’s tools are big. Dustproof belt material will be best for carpenters because the wood debris will stick the fabric of the strap.
- Painters Tool Belt:
Painter tool belts are pretty different from other tool belts. Painters don’t need to put heavy tools in their tool belt like others.
They need to carry various brushes and color that are small equipment. So, their tool belt doesn’t need to be heavy like other professionals tool belt.
Painters don’t need many pockets or too many loops as they need to carry few tools. 2-3 pouches and a few hooks are enough for painters to carry their paint brushes. Washable fabric and any synthetic material will be best for the painters tool belt.
- Electricians Tool Belt:
Electricians tool belt comes with multiple pouches and pockets. Some companies offer special tool belts for professional electricians.
Electrician tool belts have some difference from others. They have some special compartments/pockets that are not available for other types of tool belts.
Their tool belt should have multiple pouches and enough space for a hydraulic machine, cable monitor and all other instruments. Because sometimes they have to climb the poles or hang high.
So, they have to keep all of their necessary tools at once otherwise they have to come down to pick those tools. Nylon and Polyester material will be excellent for the electrician’s tool belt.
- Mechanics Tool Belt:
There is an exceptional type of tool belt for automobile mechanics. There is some tool belt available that are magnetized. This kind of tool belt is helpful for holding metal equipment that is easy to lose.
- Craftsman Tool Belt:
The tools type of craftsmen is different than other professionals. So, craftsmen belts should have the capacity of keeping them. There are tool belts available on the market that are specially made for serving craftsmen.
- Plumber’s Tool Belt:
The plumbers tool belt should be water-resistant. They most often face wet and moist places. Most of the time they end up with water splashes.
A tool belt of non-leather material will be best for plumbers. Because leather belt will be damaged by water unless it is water-resistant. Polyester and Nylon are also not suitable for a plumber.
- Roofer’s Tool Belt:
A roofer has to take all his tools at once as he works by hanging from wall and roof. that’s why multiple pouches and pockets will be very helpful to him. Their tool belt should be lightweight as they will hang most of their working time.
Polyester and Nylon are comparatively lightweight than suede leather material. Nylon and polyester are flexible too. They will also need a few zippered pockets as they have to carry screws, nails, and nuts.
- Construction Worker’s Tool Belt:
There are different sectors in construction sites. A construction worker doesn’t need to carry as much tool as a roofer. A construction worker is hired for only one particular work while a roofer has to check a lot of sectors such as plaster, shedding etc.
So, they don’t need a tool belt with additional pockets as they don’t need a lot of tools. The material of construction workers tool belt should be washable because construction sites are very dusty.
- Glass Cleaner’s Tool Belt:
Glass cleaners don’t have to carry many tools. They usually need a cleaning agent and glass wiper in their work. Some additional tools are also needed.
But they won’t need a lot of space in their tool belt. Polyester type synthetic fiber material will be better for glass cleaners.
Benefits of Toolbelt
- Better Work Efficiency:
Toolbelt gives you better work efficiency.
While a toolbelt is wrapped around your waist, you are able to work more efficiently, whether you have a helping hand or no support. Toolbelt gives you every tool that seeks anytime and thus they help you to perform your work more efficiently.
You’ll have a lot of pockets in your toolbelt wrapped around your waist. That’s why you don’t have to left your tools behind.
Compare toolbelt with any tool bag, you will easily notice how much time is saved in finding these tools.
You don’t need to organize your toolbelt every time like toolbag as they are well-organized beforehand. Thus toolbelt saves your time in completing a task.
In past days, Electricians, carpenters or technicians need to seek for helping hand or run to their toolbag often. Those days are gone after toolbelt has come on the market. That’s why toolbelt is time-saving and very effective.
Toolbelts provide you a comfortable usage as they easily fit any waist. It helps you to hold frequently used tools and all sorts of important tools as well as accessories with little pressure on your body. Your hands remain free when you use toolbelt that is one of the major advantages.
While you are performing repair work, cable maintenance, changing the board, you don’t have to hold the tools with your hands if you have your tool belt wrapped around your waist.
- Improves Productivity:
It doesn’t matter what kind of industry you are working for, the deadlines and destinations of your industry can make you stressed highly.
A good quality tool belt will make you able to manage these deadlines on time. The design of toolbelts are very well made to give improves your productivity in work.
- Great Variety:
Nowadays, the demand for tool belts is very higher in the market. Different companies are launching varieties of tool belts. You have a good range to select from different brands to different materials.
Some companies make tool belts that have extra suspenders or back support to control the weight of your body and tools. The different straps help you to adjust the tool belt as your need.
There are usually minimum 10-18 pockets available in any good quality tool belt. You can select that has a lot of pockets.
- Prompt Actions:
A tool belt helps you to act promptly. It gives you the respective tool or accessory at the right time. But tool bags can act very aggressive in this matter. They can act very aggressive in helping you with the tools whenever you need it.
A typical tool bag will fell you in problem when you need to finish any urgent repair work by hiding nail, bolts or any other things.
- Enhance Safety:
Safety is fast and last. Tool belt ensures your greater safety. They are safe to use when you have to climb a building for fixing or maintenance anything. The various pockets of toolbelt prevent the risk of any accidents of falling apart and keep your tools safe.
- Easy To Find Tools:
When you wear a tool belt around wair waist, you can easily find and get your smaller tools immediately that you need.
Tool belt offers a lot of pocket and loops. So, you can put different kinds of tools in different pockets. And it will help you to find the tools easily when you are working. You don’t need to waste time on finding tools because of the tool belt.
- One-handed Work:
When you’re wearing a tool belt, your both hands remain free for work. One hand is used to take the tools from the tool belt and other hand works with the specific tool. Thus, the tool belt makes your balance better.
- Work for Longer Time:
Tool belt enables you to work for a longer period.
If you don’t use a tool belt and bear tools by your hand for a longer time, then it may cause pain to your hand and you will not be able to work for a long time. But when you wear a tool belt, you can keep your necessary tools in the tool belt and work for a longer time.
Why Should You Wear a Tool Belt When Working?
The uses and benefits of tool belts are awesome. You will be surprised after knowing the benefits of the tool belt. If you use tool belts, you will feel it practically.
- Improve Attention:
A tool belt will improve your attention while working. It will help you to spend less time searching for your tools and working for a long time with proper attention.
You can easily and immediately get the tool that you need. Thus, the tool belt increases your attention and make your job perfect.
- Keep Tools Organized:
A tool belt will help you to keep your tools organized. And it is one of the good habits. This habit will provide a good effect on your job and people will be impressed by your outstanding work.
- Reduce Back Pain:
Sometimes you have to carry your tools for a long time while working on the home. Using a normal bag can give you back pain. A tool belt will reduce your back pain. So, that’s one reason you should use tool belt while working on your house.
- Save Time:
A tool belt keeps your tools in your hand’s range. You can easily get one which you need.
You don’t need to spend time searching for your tools. Spending much time in searching tools will decrease the harmony of work and your job may remain uncompleted. These problems can be solved if you use a tool belt.
- Prevent Losing Tools:
A tool belt saves you from losing your tools. When you are wearing a belt around your waist, then you don’t need to tension about falling your tools behind and losing them. Thus, a tool belt prevents losing your tools.
Different Parts of Tool Belt & Their Uses
The tool belt is the best way to carry your tools whether you are a carpenter, plumber, painter or anything else. But every tool belt cannot satisfy everyone’s needs.
Different professionals need a different kind of professional tool belts. The main difference is basically the different parts and the material used on them.
So, you should have the idea about each part of tool belt to decide what parts you need on your tool belt. For example, if your job doesn’t require a hammer, then you don’t need to buy a tool belt with hammer holster.
In this point, we are giving you the idea of tool belt parts to help you choose the right one for your job. It’s not mandatory to have all of these parts on your toolbelt. Some parts are added to increase the storing capacity of the tool belt.
These parts are used for storing tools. Pockets and pouches vary in shapes and sizes according to the tool items you will store in them. They are mostly waterproof with polyester or nylon material construction.
- Pocket Cover:
Some pouch or pocket comes with covers. This covers of pockets protect the tools from dirt and water. It also protects the tools from falling from the tool belts pocket. These covered pouches and pockets are primarily used to store smaller tools and parts.
- Hammer Holder:
This part of the tool belt is specially made for holding a hammer. This part is made of leather or durable metal. The sizes of hammer holster vary according to the structure/shape of your hammer. But they can also carry any other tools with a similar shape/structure.
Hook is used for hanging tools like hammer, wrench, plus and similar tools like them. They are also used for holding power tools.
When you are carrying heavy weight, a tool belt can be loose and fall. Suspenders are used to solve this problem. They are used to ensure that the tool belt stays stiff on your waist.
Lightweight additional tools are often hanged with this part. The clasp is generally used to hold the suspenders and the belt around your waist.
There are different shapes of a clasp. Their purpose is different too. Hanging clasp can’t tighten your tool belt and fastening clasp can’t hang your tools.
Some clasp is made of metal and hard steel. But most of the clasp is made of plastic. The metal clasp is comparatively expensive and heavy. On the contrary, plastic clasp is cheap and lightweight.
- Drill Holster:
This part is used for holding power tool such as a drill machine. This part of the tool belt is made of polyester or leather material.
- Multi-Tool Bag:
Multiple tool bag offers different compartments for storing different tools. You need to use one compartment for storing multiple tool types. if you have a lesser amount of pockets and different types and sizes of tools.
- Pocket Lock:
Some tool belt offers pocket lock. It’s a good part to have in your tool belt. It will resist your tools from falling from the pocket.
Buckle can either be made of metal or plastic. they are one type of clasp. this buckle is only used to tighten the belt on your waist.
- Pliers Holder:
Pliers don’t fit in any of your tool belts pockets properly. So, tool belts have pliers holder to hold them properly.
- Knife Guard:
Knife is very dangerous as they are sharp. For safety, they need to protect all the time. Many tool belts offer knife guards to protect the user/wearer from the external damage.
- Axe Guard:
Axe is a sharp and very hard instrument. Some tool belt has an extra sturdy leather pad that holds the axe safely and protects the wearer.
- Padded Belt:
Sometimes you may need your tool belt for a long time. If you are a professional, then it will happen often. That’s why your tool belt needs to be padded to feel comfortable wearing this belt.
The padded belt means foam or cotton inside the belt construction. Some tool belt has the option to add padding separately. The padded belt is very important if you want to work comfortably for a long period.
- Magnet Base:
Magnet base serves as small pins and screw holder. They are important parts to have in any tool belt especially if you carry smaller tools like pins and screws.
It’s really time-consuming and irritating to take pins and screws from your tool belts pockets each time. It will be very difficult for you to find them when you have a few small screws and pins in your tool belt.
That’s why a magnet base is very important for a tool belt. If you have magnet base, then you don’t need to look in your tool belts pouch for the smaller screws and pins every time.
- Phone Holder:
Many tool belts come with a special pocket to keep your phone. It’s a better part to have. Because you can not hold your phone in hand when you are working. It’s also not a good idea to leave the phone in your pockets. So, a phone holder is awesome parts for any tool belt.
I am pretty sure that now you have understood about all of the parts of the tool belt and their uses. Now, you can easily choose one tool belt for you considering these parts and their uses.
Common Tools to Keep in Tool Belt
Different professionals need different types of tools. Their tool belts are also different. But there are some common tools that you will need often.
- You will need a hammer often. Keep hammer of any types.
- You can keep some pencils in your tool belt.
- A chalk line is a common tool for many jobs. You can keep it.
- The flashlight is very important for working in the dark situation. Almost all kind of job requires this in dark situation.
- A ruler is an important tool for any professional. You can keep it in your tool belt.
- You will need utility knives a lot of time. It will make the job easier.
- Screwdrivers are a common and useful for many jobs.
- Needle nose pliers are very useful for any job.
- A measuring tape is an often needed tool for many jobs. You can keep it too.
- Nail pullers are a common tool to keep in the tool belt.
- Cutters are useful for many jobs.
These are the common and useful tools for carpenters, mechanics, and technicians. You will need these common tools in many terms of work. Simply to say, it’s an ideal list of the tool for any job.
A List of Tools That Carpenters Usually Needs
I think, after reading our article, you’ve got some good idea about carpenters tool belt. But do you know what tools carpenters usually need? Read this point to know.
A claw hammer is probably one of the most basic tools in any workshop or household. It’s a vital and important tool for carpenters.
Clawhammer has a heavy blunt end for striking nails. And a rounded claw ends for prying and removing nails.
If you use steel handle hammers, make sure that they have rubberized grip for better control and improved grip performance. If you are driving a lot of nails, then wood handles are alright.
But it will make your hand sweaty if you don’t use gloves. The most common sizes of claw hammer available are 16-20 oz.
- Standard Saw:
Standard saw are simple and easy to use. In many cases, you don’t want to use power tools for cutting or you don’t have to use power tools. Because of the many variations of this tool, the standard saw/hand saw is always a useful tool to have with you always.
- Spirit Levels(Large, medium and small):
It’s now available on your smartphone too. Spirit levels will give you accurate measurements of the flatness of a surface or a product. You should have a selection of spirit levels.
It’s better to use longer levels for a neater product if you are working with studs. If you are not familiarized with the deviations and tolerance while using short level, then a short level might mislead you.
A workbench is a very convenient and practical tool. The most sophisticated models of workbench are equipped with clamps and adjustable surfaces.
- Marking Tools:
Woodworkers who are best and most talented can cut a straight line without a guide especially when using a power tool. That’s why carpenters use marking tools to make sure that their work is accurate.
- Measuring Tape:
Every carpenter uses a tape measure even for the smallest work. Tape measure typically extends up to 5 meters.
- Coping Saw:
Coping saw is frequently used for cutting moldings and shaped joints. It allows you to cut intricate shapes and irregular lines.
- Tenon Saw:
Tenon saw is a must for cutting joints. It’s fine teeth and the rigid blade has made it excellent.
- Chisel used by Carpenters:
Carpenters need a good chisel to complete clean cuts. They are used for chopping wood for door hinges and other fine woodworking jobs.
- Nail Gun:
You will need a nail gun to pop nails faster and very efficiently. You will surely need this if you are working with wood.
Carpenters need a pencil to mark where the next cut will be. Mechanical carpenters pencil are now available on the market that will never need to be sharpened again.
- Carpenter’s Square:
A carpenter’s square is used to mark out straight lines and right angles. It has various applications in carpentry.
- Angle Grinder:
An angle grinder is used for polishing, cutting and grinding. It should be in every carpenter’s tool belt.
- Bench Grinder:
Bench grinder is fairly cheap. If you don’t have a bench grinder. Then quickly get one and you will be stunned.
- Electric Router:
The Electric router is especially used in cabinetry and often used in all areas of carpentry. So, get one.
- Nail puller:
Nail puller is designed to remove difficult nails from timber.
- Wood Mallet:
This tool is used by carpenters to drive dowels or wooden workpieces together.
- Pry Bar:
Pry Bar is one of the must-have tools for every carpenter. If the right leverage is applied, It can pry open pretty much anything.
- Large Clamps:
Large clamps are used in many carpentry tasks. They are extremely useful tools. This tool comes in a wide range of models and designs.
Bradawl is a simple tool used to mark an indentation in wood for a screw or nail to go in.
- Sliding Bevel:
If you have a sliding bevel, then it will serve you best to set an angle and mark off a lot of timbers than any other tools.
- Retractable Trimming knife:
It is one of the most useful tools. Carpenters need to use it when cleaning out mortise joints, scribing wood or for sharpening their pencil.
- Marking Gauge:
This tool is used to mark parallel lines on a workpiece prior to cutting. It is also used in many carpentry tasks.
- Metal Rule:
This tool is used to measure distances between two points.
- Nail Punch Set:
Every carpenter should have a set of nail punches of different sizes.
- Ball Pein Hammer:
Ball pein hammer is often used by carpenters to strike chisels, nails, and punches.
- Carpenters Square:
Carpenters square is a little handy tool used to mark out right angles and straight lines.
- Mitre Saw:
Mitre saw are used to make a quick, accurate cut.
- Jig Saw:
If you have a jigsaw, then you are allowed to cut curves and patterns in your chosen material. Pick one that fits your hand comfortably. If your jigsaw doesn’t fit you, then you may lose control.
- Table Plane:
Table plane is ideal for use on longer workpieces. They are quicker than an electric planer.
- Oscillating Multi-Tool:
No carpenter should be without one oscillating multi-tool. It can cut, polish, sand, rasp, grind and even scrape.
- Bench Vice:
Having a Bech vice in your carpentry tool collection means that you have an extra pair of strong hands.
The tool used to sharpen tools that have dulled over time. Keep your tools always sharp to increase the work rate.
- Air Compressor:
This device turns power into kinetic energy in the form of compressed air. This tool is typically used to power your nail guns.
How to Wear & Organize a Tool Belt Properly?
“How to wear a tool belt?” is the common question for every new user of the tool belt.
If you are a new user too, then you will get these common questions answer at this point. If you can wear a tool belt properly, then it will make your job easier and comfortable. Here is a step by step guide about how to wear a tool belt properly.
- Step 1:
Buy a good quality tool belt: The first thing you need to is to buy a good quality tool belt. Buy one by considering your profession.
You have to spend your money wisely. You probably need a tool belt that has a lot of pockets, if you want to organize various sizes of nails and screws in it. To reach your tools more easily, you should also make sure that, the tool belt has a lot of pockets on your dominant hand side.
- Step 2:
Make sure the belt suits you: It is very important to confirm before you buy a tool belt. You have to buy one that will suit your waist.
So, you should try each tool belt before buying. If you can choose the right one that suits you, then it will help you to use it for a long time.
- Step 3:
Keep the main tools for leading hand: Keep most primary tools that you use often on the hand side that are dominating to perform your tasks.
For example, you can put a claw hammer that will you need often to working with nails. You can also keep Chalk liner, Carpenter’s pencil and slip joint pliers.
For roofing work, a utility knife is an essential tool for cutting drywall. A utility has extra blades. So, you can also make straight or curved. Thus, keeping the main tools in your hand range can help you to make your job easier.
- Step 4:
Keep optional tools for assistant hand: Tools that are important but don’t need to use frequently are optional tools. You have to store the tools in your assistant hand.
You can put them the opposite side of your tool belt. In this side, you can put a cold chisel, nail sets etc. Fasteners are also accepted on this side.
Thus, keeping optional tools in the opposite will make space for the main tools and make your work more efficient and easier.
- Step 5:
Overturn the belt: If you can overturn the belt, then it will ensure maximum hustle and console.
If you are able to overturn, it will help you to get your tools easily that are kept on the opposite side. If your belt is able to overturn, it will be very helpful when you are working for a long period.
- Step 6:
Freehand ladders climbing: You just can keep the whole essential tool items in your tool belt while climbing.
Therefore, both hands remain free to hold the ladder while climbing. This will help you to move more comfortably if your job requires movements.
- Step 7:
Use the belt as your comfort: You have to use your tool belt for a long time. You can use a tool belt with suspenders for more comfort. Wear your tool belt properly as directed and take the pleasure of using your tool belt.
Wearing a Tool Belt with Suspenders
Imagine you have just bought a brand new tool belt but it is so heavy that it is bringing your pants down every time. It must be an embarrassing moment for you if that happens during work. A weighted tool belt can cause severe pain and you may face back pain. Suspenders redistribute the weight of a tool belt and protect you from hip and back pain.
The first option which might come to your head is to wear a tool belt with suspenders belt but it causes pain in your butt. This is a very common problem for farmers, electricians who need to use a tool belt to carry vital stuff around.
The solution often lies in properly adjusting the suspender and distributes the weight of the tools and fasteners for more comfort. For that, you need to know how to wear a tool belt with suspenders perfectly.
The process of wearing a Tool Belt with Suspender:
- At first, fasten it at the back of the trouser, put it on and skip the belt.
- Secondly, cross the suspender on the back and bring them down to your chest.
- In the final stage, attach them at the front of the trousers.
Basics of Carpentry
Are you going to join the carpentry or woodworking industry?
If the answer is yes. Then, you need to know about the basic skills and tools of carpentry. This paragraph is about those skills and tools that you need for joining carpentry. So, no more delay. Let’s start!
Select the Correct Screws
Carpentry jobs (especially woodworking) will require you to select the right size and types of screws to make sure that you’re doing things correctly.
This sounds very easy. But actually, it’s not so easy. Because there are a lot of sizes and styles of screws out there. They are designed to work in specific jobs and purposes. Learn more about the different sizes and types of screws before starting woodwork.
Drilling is a pretty simple thing to do. It is one of the most important skills for woodworking. Learn how to drill perfectly, make holes that are the correct depth, catch stray dust and so on.
To attain drilling skill, the first thing you need is a reliable drill. There are plenty of drill brands available in the market. You can start practicing with a corded or cordless drill. Buy one that is high quality. I myself like the drills of Dewalt brand.
Learn To Use saw
Woodworking jo often require cutting. You can cut wood effectively in many different ways. You should have the knowledge to understand which tool and method you need for cutting.
Hand Saws are a good primary option. You can use hand saws for quick cuts. But hand saws take some strength to make the cuts as they are non-powered.
Jigsaws are versatile saw. They allow the user to cut curved and circular patterns in stock. Jigsaws have the ability to make weirdly -shaped cuts while remaining reliable for most of straight cuts and edges.
But the blade of jigsaws is small, interchangeable and cheap. A band saw will likely be more accurate. But jigsaw will be perfectly effective for the beginner.
Circular saws are used for straight and long cuts of heavy-duty projects. When the circular saw is used with a clamp-on straight-edge, then it can be just about as accurate as a table saw. This saw is a little advanced for the use of a starter. It doesn’t allow for curves or differently shaped cuts.
Select the Correct sandpaper Grit
When you will work with wood, you will often need to sand items to finish a given project. So, you need to improve sanding skills. Sanding is not a complicated task. It’s an easy job.
First talk about hand sander as they are the simplest option. hand sander typically works well for a range of small projects. Invest in a good quality sanders before joining woodworking job.
After hand sender, the orbital sander is the most commonly used type. The last type we will discuss is a belt sander. The belt sander is a much powerful and heavy option.
Common Carpentry and Construction Terms
Do you want to be a carpenter?
If yes. Then you should learn about these terms of carpentry. Also, knowing these terms will help you to discuss with a carpenter in their language.
Here is a list of some common terms used in the industry. Each term has a brief explanation. Let’s learn these.
- “A” Brace: It is a brace shaped like a letter A. It is used to hold a wall in place until another wall can be built. Normally, they are typically used in roofing.
- Allen Key: A hexagon and L shaped key. They are available in imperial or metric sizes and used for tightening Allen screws /nuts bolts.
- Architrave: The decorative moldings installed around door frames to cover where the lining meets the wall. They are also known as door casing.
- Adhesive (wood glue): A substance for sticking two materials together. Grip fill, PVA, contact adhesive for example.
- Balloon wall: Any wall that is taller than a normal 8′ or 9′ wall such as stair opening or a 2-story foyer. These are also used in modern carpentry.
- Bearing Wall: Any wall framing that carries a ceiling, roof or floor load from above. They typically carry weight from the roof or ceiling and need extra support to hold the load.
- Bottom Plate: They may also be referred to a sole plate because most of the other framing components rely solely on this bottom plate for support. This is the lowest horizontal framing component in any wall.
- But Joint: This is a simple end to end joint between two pieces of timber. Though butt joints are not the strongest in the carpentry industry, they are great when used in conjunction with fasteners.
- Block Pain: They are designed primarily for cutting across end grain. They are useful for many other applications.
- Bead/Beading: They are used either to cover a join between two surfaces or for the enhancement of detail. For example, they are used to cover a join between two surfaces like timber and plaster.
- Barge rafter: Also known as a fly rafter. Some people use this term when they nail a board down for a laydown valley.
- Birdsmouth: Birdsmouth used in roof framing. They are triangular-shaped cutout. They allow the rafter to sit on the top plate properly the two cuts to form this are known plumb and level cuts.
- Caliper: An marking/measuring/checking tool with two legs. One of them looks a bit like a compass.
- Cat’s paw: It is a specialty pry bae designed just for digging in and pulling embedded nails. It is a very useful tool for the carpenter. Every rookie should carry the tool just in case his boss needs it.
- Ceiling Joist: They run horizontally across the ceiling. These pieces of lumber are where the rafters and ceiling are connected.
- Carbide Tipped: Drill bits, cutters, blades etc with extremely reinforced cutting edges. These are good for drilling different masonry materials.
- Carpenter’s Pencil: This pencil is much wider than a normal pencil and they are rectangular in shape.
- Chuck: It will hold a router cutter or drill bit that will be spinning in the tool. Lathe and drill are the two example of this.
- Crosscut: A cut that runs across the grain of the timber is called crosscut.
- Collet: It is another type of chuck that routers use. Collet accepts a certain size of cutter.
- Carcassing: First six carpentry or farming carpentry is also called ‘carcassing work’.
- Cope cut: It is also known as Joinery. A coping saw is used to make an undercut in the piece that is mitered.
- Crown Molding: Crown molding is normally used for pilasters, capping walls and cabinets. They are used extensively in the creation of windows and doors and exterior and interior cornice assemblies.
- Dovetails: A right angle joint where the fingers are looks like a doves tail. These joints commonly found in furniture and drawers pieces. They can be cut by hand or special jig. They are one of the strongest joints.
- Dado rail: They are found mainly in period style buildings and they run around the room around a meter off the floor.
- Dressed Size: These carpentry terms heard more in the joinery shop than on site. This term means the finished size of timber after being planed/machined.
- Dowel: They are used commonly on the staircase to hold newel posts to stair strings.
- Dowel center: It is a metal punch that goes into the previously drilled dowel hole to mark where to drill the 2nd place.
- Eave: It is a part of the roof that hangs over a wall.
- Epoxy Glue or Resin: It is a very strong glue often consisting of two parts that particularly everything.
- Estimating: Calculating how much material, the cost is required and pricing up work is called estimating.
- Face: The part of the board that will be visible when the project is completed. You typically tend to work and set out measurements from the face.
- Featherboard: It is a piece of wood with fingers and used to press material being machined down against the table or machined against a fence.
- Fascia & Soffit: They are attached to the bottom of the roof structure to fix the gutters and to forms the eaves too.
- Finger Joint: They are often used to minimize waste and in manufacturing molding to join short lengths together.
- Finish Carpentry: This type of carpentry focuses on model building, cabinetry, joinery and other projects that involve acute attention to detail. Finish carpenters perform works such as installing crown molding, stairs, baseboards and other features of a building that requires an aesthetic appeal.
- Floor to Floor: This carpentry is used to describe the total rise of a staircase. This measurement is a directly vertical measurement from one floor to another.
- Flush: When two adjoining surfaces are joined perfectly flat to each other, then they are flush. Otherwise, they are proud and shy.
- Farming Carpentry: This type of carpentry includes timber-framed houses, roofing, walls and floor joists.
- Fret Saw: This machine is used for delicate cuts in thin material.
- Grain: The fibers of the wood and their direction are also referred to as grain. The direction Crosscut means cutting across the grain and rip saw means cuts in line with the grain.
- Grit: If you hear the carpentry term that is called grit, then it could be in relation either a sharpening oil stone or sandpaper. 120 grit sandpaper is fairly fine, 40 grit is very rough.
- Header: It is a beam that rests horizontally above a window or door. It is used to support anything above the opening.
- Hardboard: It is a flexible, strong and smoothes sided sheet material. Hardboard is also known as high-density fibreboard.
- Hardwood: They are not like softwoods which come from conifer trees. They are commonly used in carpentry and joinery.
- Hinge: It’s a mechanical device that allows two objects to pivot on each other. They are typically used for gates, doors, windows etc.
- I-Beam: It’s a type of steel used in construction. As a carpenter, you will often need this.
- Jig: It’s a guide that makes cutting pieces of lumber more consistent and faster. Worktop, hinge and letter plate jigs are common carpentry jigs available.
- Kick Back: Kickback happens when a power tool throws a piece of lumber back towards the operator.
- Laminates: They are created by gluing thin layers of material together. Laminates come in a variety of sizes and shapes. they are rated depending on the material.
- Lull: It can easily become your best friend especially when you’re doing roof framing.
- Miter Box: This device is used to guide a hand saw at 45 degrees. The miter box is used for cutting perfect miters on moldings.
- Mortise: It’s a normally square hole cut. Mortise allow a tenon to pass through and form a strong/powerful join between two timber pieces.
- Non-bearing wall: A wall that doesn’t support any additional weight such as roof framing, floor framing or ceiling joists.
- Ogee: It’s almost an ‘s’ shape molding and most commonly found on skirting/baseboards and architraves.
- On center: The measurement from the center of one board to another.
- Particle Board: Also known as chipboard. It is made of lots of bits glued and compressed together.
- Plumb: A term that is used to describe that is perfectly vertical.
- Plywood: It’s made up of opposing layers. They are often used for its strength and resistance to shrinking/warping.
- Portfolio: Carpentry portfolio is one of the best selling tools.
- Plumb bob: This tool is used in carpentry to find a point directly below another. Though it is not used very much nowadays, it’s still very useful for plumbing gable walls and tall balloon.
- Quarter Round/Quadrant: It refers to a decorative molding type that is a quarter of a circle in size.
- Rough Carpentry: This carpentry involves floor framing, roof framing, window installation and other projects that don’t necessarily have to be finely designed or polished.
- Rip cut: It is the opposite of crosscut. Rip cut means cutting parallel to the grain of the timber.
- Router: This fast and versatile cutting tool is typically used for dados, rebating and other profiles/shapes.
- Stud: It’s a piece of framing lumber and used to construct walls.
- Speed square: It’s a very useful tool for almost all aspects of framing carpentry.
- Stringer: The main support system for a staircase, which the risers and treads are attached to the stringer to ensure full support.
- Stile: The vertical member of a door’s construction is named Stile.
- Spokeshave: It’s used to form and smooth curved surfaces as opposed to flat.
- Spade Bit: It’s relatively low-cost drill bits used for cutting small to medium size holes. This bit available with either a point or threade center guide.
- Tear-Out: When a tool accidentally removes a chunk from the workpiece, then tear-out happens.
73: Twist: If the timber is seasoned or the timber is not correctly stored, then it has the tendency to twist along its length.
- Varnish: It’s a liquid used to finish timber.
- Valley: The intersecting angle of two different roof slopes.
- Yardstick: It’s a wooden role and mostly used for setting out and marking joinery work.
- Zero Clearance Insert: It’s used on table saws to remove the gap around the blade, increasing support for smaller wood pieces.
Make Your Own Carpenter Tool Belt
The tool belt is an important part of any job. Carpenters need a tool belt to do their work perfectly. When a carpenter wears a tool belt around his waist, he gets all his tools within arms reach.
Do you know, you can build your own carpenter tool belt. Let’s talk about this.
Understand Your Jobs
A carpenter tool belt is not complicated. It’s simple. If you construct your tool belt own, the tool belt will best work for your specific jobs.
If you often work on stairs, then a tool belt that has pockets on the sides could be more useful for you. If you bend over a lot of times, then a tool belt that has strapped pockets may be best serves you.
Select a Primary Tool Belt
You can buy a pre-made, basic belt but they don’t have any pockets. They are simply made to be a template.
When you select a primary belt, then it will give you the template for your final belt design. An apron belt may be best for you if you have a big number of tools.
On the contrary, a leather or simple fabric belt will be sufficient if you have a fewer number of tools.
Think about The Tools That You Will Need
Think about the tools that will need to keep in your tool belt. Determine how many tools you will need to put in your tool belt, how heavy and big they are. The shapes and sizes of tools will affect the size of the pockets of the tool belt.
Add the Pockets for Keeping Tools
When you’re creating your own carpenter tool belt, it will be most difficult to add the pockets of the tool belt.
For fabric belt, you can sew the pockets out of fabric and sew them onto the belt. Keep in mind to strengthen with double stitching to make sure that the pockets stay put.
On the other hand, you will want to attack the pockets twofold for a leather belt. While you need to sew the pockets shut, you may need to use the metal rivets to fasten the corners.
While you have a tool belt with you, you can easily get your job done. It is good to have a self-made affordable carpenters tool belt. It will be best if you take the time to make your own carpenter tool belt. The belt will serve you best as the belt is specially customized for your specific job.
Take Care of Your Tool Belt
Taking care of your tool belt will help you to get maximum benefit and longest lifespan from it.
Regular cleaning is very important for your tool belt. Cleaning the tool belt regular will keep it in peak condition. Before every use, you should inspect for serious splits, rips or any fraying that may cause the tool belt to fail. It’s also important to carefully check buckles and loops for damage.
Cleaning a Tool Belt: I told you before that, a tool belt will give you better benefit if you clean it regularly.
If you’re using a leather belt, you should use a special conditioner and waterproofing dressing to prevent possible drying out and cracking. Other tool belts can be cleaned with plain water and dried naturally.
But you should not expose them to extreme heat like placing them on hot appliances or placing in a tumble dryer. Don’t place them in direct sunlight for prolonged periods as this could damage the material or this wild either dry them out or a mild-dew will form.
Below are some ways using which you can clean your tool belts:
- Remove dust or dirt from your leather tool belt regularly. You can use a shoe cleaning brush or soft-bristled brush to remove dust or dirt.
- In the market, you will find some special creams and conditioners to keep leather belts as good as new. Make use of these creams and conditioners occasionally to keep the belt supple.
- keep your tool belt away from direct sunlight and extreme heat for a long period. Store in a dry and cool area.
- Wipe down any stains immediately with a piece of cloth before much damage is done.
- Check your tool belt regularly for any kind of tear or damage.
Protecting A tool Belt: If you work under very damp conditions for prolonged periods, then you should check out fully waterproof tool belts. Even if you get a waterproof tool belt, keep it away from chemicals and solvents.
Don’t flood the pockets with tools. Don’t try to fit big tools that are too big to fit into the pouches and pockets available. No matter what kind of liquid it is never put liquids directly into any pouch and pockets.
You should put the tools inside the pouch in an upside-down position to ensure that the sharp sides of your tools don’t come in contact with the material and tears it down.
Softening a Leather Tool Belt: You can easily soften your leather tool belts. One of the easiest ways is to rub a natural oil (coconut oil) into it. Rub the oil over the tool belt for a few times. You can apply more natural oil if you want to make your leather softer. Once rubbed and applied, allow the belt to dry naturally before use.
On the other hand, take some rubbing alcohol into a tissue or towel. Rub it into the leather surface of your tool belt. After rubbing is finished, allow the alcohol to soak into the leather.
That’s all about cleaning and taking care of tool belt. I am pretty sure that, after reading this guide, now you know how to clean and take care of your toolbelt. And now you’re able to keep your tool belt in peak condition.
Tool Belt Cleaning Add-Ons
Leather Honey: This all-rounder leather cleaner is generally used for cleaning shoes, jackets, seats and other leather apparel items.
Leather Sealer: The leather tool belt will loose the natural waterproof element eventually. The leather sealer can fix this problem by revitalizing the natural oils in the leather material.
Tool Belt Safety
The tool belt is a very important tool for carpenters, electricians, mechanics etc. They make work easier and efficient. Unless you use it properly, then you will face danger. You should use it correctly to ensure safety.
Your tool belt should be made of sturdy material. Pockets/compartments, slots, and pouches should be of the correct shape and size.
You have to keep the sharp tools very carefully. Falling tools can cause injuries. So, it’s very important to keep your tools secure. You have to guard sharp tools(saws, Axes, Knives etc) by sheaths or scabbards to prevent tool damage and injuries.
You should never use tool belts as safety for working at heights. A tool belt should be properly balanced. The weight of a tool belt should be approximately equal on each side.
If you need most of your tools on one side of the tool belt for easy access, then balance the opposite side of the tool belt with bolts or nuts or anything else. Don’t fill your tool belt with unnecessary tools and get rid of extra weight.
You should not hang your tool belt on hooks, nails or other protruding objects. Keep all of your tools in properly sized pockets, slots and pouches. Give your back some rest when you take a break. Take the tool belt off when you’re taking a break.
Where To Buy?
You can buy tool belts from any hardware store. But if you want to pick one after comparing different brands, then you need to buy tool belt form any retail websites. There are a lot of e-commerce sites who sell tool belts, pouches and accessories.
You can check Amazon, WalMart, eBay and many other sites to access tool belts collection. One of the best benefits of online shopping is that you can read reviews of previous users of any product. This helps you to figure out the best one.
It can be very confusing to find the best one as there are so many products out there. But we hope that you’ve found our best carpenters tool belt review helpful. Please, do share this article if you’ve liked it, which will surely motivate us to review more products and write a massive guide like this.
If you still need anything else to know about tool belt, then please let us know by commenting below. Thank you for staying with us that long. Take care!